How 2020 sulphur rules are turning out

Apr 16 2020


One of the biggest concerns brought about by 2020 sulphur rules is unexpected – the availability of traditional fuels at traditional prices. There are also concerns about mixing non compatible fuels and decreased lubricity, writes Neil Graham, technical director of Royston.

As 2020 dawns, it appears that suppliers have responded to the upcoming demand for very low and ultra-low sulphur heavy fuel oil, and supply will not be a problem.

 

Possibly of greater concern is how long high sulphur heavy fuel oil will remain available. Or if the price of it will get closer to the low sulphur fuels. If this happens, it will greatly affect the ROI of those owners who opted for scrubbers.

 

Another problem could be incompatibility of bunker stems (individual deliveries).

 

The nature and type of fuel oils that will be available are expected to differ significantly.

 

The mixing of non-compatible fuels can lead to the formation of sediment in the tanks which can block filters and purifiers.

 

This may leave shipowners facing serious engine repairs, requiring vessels to be taken out of service.

 

Practical steps need to be taken to secure quality control. Industry good practice proposes developing a ‘bunker checklist’ to supplement the vessel’s own safety management system procedures – a list of checks and tasks from pre-bunkering through bunkering to final completion and disconnection.

 

Fuel segregation between bunker sources will also become a feature of future operations until all sources of fuel can be proven to be stable, mixable and compatible with each other.

 

Smaller bunker orders may become the order of the day to avoid mixing different fuel supplies.

 

Monitoring of the fuel will be increasingly important to avoid poor quality fuel reaching the engine, as well as running purifiers at their optimum settings i.e. the right fuel oil temperature and the correct throughput (slow as possible).

 

Decreased lubricity

Lower sulphur content in fuels will contribute to decreased levels of ‘lubricity’ in engines.

 

This will contribute to increased wear and tear in fuel pumps and require additional maintenance of injectors. These components have high tolerances.

 

Most manufacturers of fuel pumps have already moved towards a higher material specification for their plungers and often use a diamond-like carbon (DLC) coating to reduce wear. These coatings are extremely hard, corrosion resistant and have ultra-low coefficients of friction. They can also be deposited with a high-degree of control of the coating thickness.

 

Cleaning

If the decision is made to move away from high sulphur HFO and scrubbers, the cleaning of pipes and storage tanks will need careful planning and mean substantial costs and down-time.

 

The recommended best practice is to flush through the system with distillate and afterwards dispose of it as waste oil.

 

Scrubber

Scrubbers are accepted by flag states as an alternative means to meet the sulphur limit requirement. These scrubbers are designed to remove sulphur oxides from the ship’s engine and boiler exhaust gases. A ship fitted with a scrubber can use high sulphur heavy fuel oil since the sulphur oxides emissions will be reduced to a level equivalent to the required fuel oil sulphur limit.

 

The most likely ships to install scrubbers are the larger deep-sea vessels which have high fuel consumptions and crucially have the space in the engine room to fit this equipment. A 50t / day seems to be an accepted cut-off point for fitting a scrubber and still obtain a reasonable ROI, say within 5 years.

 

LNG

Converting engines to liquefied natural gas (LNG) will provide considerable reductions in fuel costs as well as reducing emissions, including SOx.

 

It will first need to be determined if the existing engines can be converted to gas, or if new engines are required (dual fuel or pure gas).

 

Finding space in the engine room for the storage tanks is key and, depending on whether the engines are converted to dual fuel or pure gas, there may still need to be a liquid fuel storage system as well.

 

 



Previous: Removing hazardous vapours from tanks using nanotechnology

Next: US Port Access, P&I Assistance and Crisis Communications webinar


Related News

Is seafarer training keeping up with technology?

(Sep 16 2021)

Is the training that seafarers are required to do, such as under STCW, keeping up with advances in technology? ICS held a webinar to discuss.



InterManager members double onboard oxygen provision after life-threatening incidents

(Sep 02 2021)

Ship managers have pledged to go above and beyond international maritime regulatory requirements in their onboard provision of medical oxygen – to be better able to save the lives of crew at sea.



Boers offering free Covid-19 jabs to seafarers

(Aug 12 2021)

Crew services specialist Boers has launched seafarer vaccination programmes at German and Belgian ports, as shipping executives warn of onboard Covid-19 outbreaks because mariners are not getting vaccines quick enough.



Seafarer Workforce Report: The global supply and demand for seafarers in 2021

(Aug 10 2021)

The new Seafarer Workforce Report from ICS and BIMCO has officially launched and is available to order now.



Shipping needs to focus on recruitment and upskilling to avoid imminent crewing crisis

(Aug 10 2021)

Predictions of a seafarer shortage by 2026 highlight the importance of prioritising competencies and skill building, says Danica Crewing Specialists.



Aug-Sept 2021

Sea Cargo Charter - ship recycling - CO2 from tank cleaning - fixing damaged propeller blades