Large percentage of ships ECDIS ready - UKHO

Jul 14 2017


Almost three-quarters of cargo ships over 20,000 gt are already compliant with the SOLAS-mandated ECDIS deadline of 1st July, 2017, according to the latest figures published by the United Kingdom Hydrographic Office (UKHO).

The UKHO estimates that a further 3,828 cargo ships over 20,000 gt are yet to make the transition to using an ENC service and therefore do not yet meet SOLAS regulations on ECDIS carriage.

The amendment to SOLAS Chapter V regulation 19.2 requires ships engaged on international voyages to be fitted with an ECDIS no later than the first survey on or after a date based on the type of ship and its size in gross tonnage. Only ENCs supplied from official hydrographic offices can be used in ECDIS to meet SOLAS requirements for nautical charts and to be considered ECDIS ready.

Around 12 months ago, the SOLAS regulations on ECDIS carriage were extended to cover cargo ships over 50,000 gt.  Today, 90% of these larger cargo ships are now considered ECDIS ready.

Emphasising the importance of compliance, Thomas Mellor, Chair of the International Hydrographic Organisation’s (IHO) ENC Working Group and Head of OEM Technical Support and Digital Standards at the UKHO, said: “The latest data indicates that the category of cargo ships over 50,000 gt is close to being the first to complete its transition to ECDIS, with only a few hundred ships remaining, which is positive news. Progress is also being made among cargo ships over 20,000 gt, with almost three-quarters already using an ENC service.

“However, it is important to be aware of the implications for the several thousand of cargo ships and any others whose ECDIS deadline has passed without having yet adopted ECDIS. For example, if a ship is detained by Australian Port State Control for non-compliance, the only way of lifting that detention is to first become compliant. Whilst ships have until the first survey after their deadline, in some cases this may mean fitting an ECDIS and training crew at considerable cost and delay,” he warned.

Chris Berkley, UKHO Senior Product Manager, explained the support that the UKHO continues to offer to shipowners and operators to help them achieve the safe, effective and compliant use of ECDIS: “As well as UKHO producing AVCS - the world’s leading ENC service - our latest ‘Living with ECDIS’ seminars continue to offer guidance that reflects the considerable progress made by shipowners and operators in their use of ECDIS over the last three years. We address the latest challenges faced by shipping companies by offering free practical advice, answering questions on ECDIS management and updating them on the latest IHO ENC Standards.”

Since the ECDIS mandate was introduced, the UKHO has highlighted the importance of understanding that having an ECDIS fitted does not guarantee compliance or constitute its effective use.

In addition to subscribing to an ENC service, the UKHO has also encouraged shipping companies to ensure that they have revised bridge policies and procedures in their ship’s Safety Management System (SMS) to reflect the requirements of safe, effective and compliant ECDIS operation; that ECDIS software is upgraded to comply with the latest IHO ENC Standards; and that its bridge teams are competent and confident in using ECDIS to its full potential.

With the Australian Maritime Safety Authority (AMSA) taking a zero-tolerance approach to breaches of these regulations, having gone as far as to require compliance with SOLAS under Australian law, this is legislation that cannot be ignored. Between January and May this year, AMSA recorded 142 deficiencies under ‘safety of navigation’, which resulted in 15 vessels being detained. Many of these deficiencies related to ECDIS and with ECDIS-awareness campaigns planned by the Paris and Tokyo MoU for the end of this year, there will be an increasing focus on safety of navigation.   



Previous: Cylinder lube oil approved by all engine manufacturers

Next: GulfNav to double its Fleet


June-July 2017

Market comment, technology, ballast water, Athens conference report



Visit Tanker Operator's online social network site