Safe sea transport of liquefied gas thanks to further development of the SAACKE GCU evo

Feb 11 2021


SAACKE Marine Systems is breaking new ground in methane combustion on LNG tankers. After just under a year of development and engineering, the company is presenting its new product - the GCU evo.

The further development of the classic Gas Combustion Unit consists of a cost-effective combination of the combustion unit with a modified surface burner. The abbreviation evo stands for "evolution". "In order to take into account the ever decreasing space available in the engine room of LNG tankers, we have now designed this system solution with significantly smaller dimensions with the same or even improved performance," explains Bernd König, Sales Director Offshore & GCU Systems at SAACKE. In addition to saving space, the new model offers further advantages for marine engineering. For example, emissions are reduced thanks to special cold flame technology and digital remote maintenance can be used. These are important aspects in the globally growing LNG market for shipyards, owners and charterers of LNG tankers and bunker vessels, on which a GCU must be installed as standard for the safe transport of LNG.

 

Compact stand-alone solution and easy handling

The optimized design not only reduces the required space on board, but also the installation costs and thus the effort for customers when using a SAACKE GCU. In addition, maintenance costs can be reduced due to the lower complexity of the system. No special foundation is required for the GCU evo with an output of 5.5 to 63 MW. The system can be mounted directly on the deck as a stand-alone unit with simple installation. There is no need to connect it to other downstream components. "In addition, due to its compact design and functionality, the surface burner offers a short flame and requires a smaller number of blowers. In addition, due to the lower pressure loss on the air side with the surface burner, a smaller motor output is required for the blowers and the power consumption is minimized as a result. All in all, a smaller footprint and height are needed and more space is freed up for other components in the shipyards," explains Bernd König. In contrast to two separate zones for combustion and mixing air for cooling the gases, with the GCU evo all the air is sent over the surface burner and only mixed further downstream. Instead of a separate radial blower, only one air blower is required. As a result, lower temperatures (approx. 600 °C) are generated in the combustion chamber and the combustion chamber material (limit temperature: 1,100 °C) is subjected to significantly less stress. "In terms of space saving as well as technical details, this GCU system is currently unrivalled on the market," says the SAACKE expert.

 

Durability, remote control and low-emission cold flame technology

The further development does not forego the proven strengths of the classic GCU - such as fail-safe control, electric ignition and the 100 % free-flow solution for combustion of the methane components in the climate-damaging boil-off gas without a compressor and at very low pressure (see below: general excursus on the GCU). In addition, SAACKE relies on the proven durability and robustness of the individual components and the overall system. "After all, all of our more than 110 GCUs in operation since 2003 are still in trouble-free operation," sums up Bernd König. By means of modern remote control, operators can also perform online diagnostics from shore, e.g. for preventive remote analysis. Thanks to the cold flame technology described above, the pollutant limit values >100 mg/m3 are also safely achieved or even undercut - with lowest NOx emission values in the range of 60 to 80 mg/m3 and CO values of 150 mg/m3.

 

Various series-produced performance ranges and test facility in China

While the SAACKE headquarters in Bremen in northern Germany was in charge of engineering and project organisation, a test plant was built at the Chinese site in Qingdao. It can burn 800 kg/h of methane and was used for product development. The GCU, which is ready for series production, is available in different output sizes from 0.4 to 4.5 t/h methane combustion with various size gradations. The scope of supply includes the GCU system including burner, control system, gas train and blower as well as spare parts service. Installation and commissioning are carried out in sections. SAACKE also offers training courses in this context. "Our basic GCU model will also remain in our portfolio, as it also covers output ranges of up to 6.5 t/h of methane for exceptional applications and can burn oil," emphasizes Bernd König.

 



Related News

Launch of ABS-Classed Jiangnan Bluebonnet VLEC

(Sep 16 2021)

The world's first IMO Type B Very Large Ethane Carrier (VLEC), the ABS-Classed Pacific Ineos Belstaff, has been launched at Jiangnan Shipyard.



Trelleborg – specialist hoses for chemical tankers

(Sep 02 2021)

Swedish polymers specialist Trelleborg makes equipment for ship to shore transfer of specialist cargoes. This case study explains how its hoses were used for sulphuric acid transfer in Peru.



Shuttle tanker Timofey Guzhenko delivers 80-millionth tonne of crude oil from the Varandey project

(Aug 12 2021)

On 7 August 2021, the Arctic shuttle tanker Timofey Guzhenko discharged at the port of Murmansk the milestone 80-millionth tonne of crude oil shipped from the Varandey oil terminal operated by LUKOIL.



Q88 LLC launches Phosphoric Acid / Stainless Steel Compatibility Calculation Tool

(Aug 10 2021)

Q88 LLC, a global provider of SaaS technology to the maritime industry, launches a new Stainless Steel/Phosphoric Acid Compatibility Calculation Tool within Milbros solution.



Aug-Sept 2021

Sea Cargo Charter - ship recycling - CO2 from tank cleaning - fixing damaged propeller blades